Limb Lengthening Forum

Limb Lengthening Surgery => Limb Lengthening Discussions => Topic started by: lovinglonglegs on December 29, 2023, 12:19:15 AM

Title: max in precice max
Post by: lovinglonglegs on December 29, 2023, 12:19:15 AM
Is the maximum lengthening capacity with the new device Precice Max is known? What's the max for lengthening femur with it?
Title: Re: max in precice max
Post by: babygirl on December 29, 2023, 08:11:46 AM
8cm most likely.

I say this because Paley is the creator.
Title: Re: max in precice max
Post by: Kintaeryos on December 29, 2023, 09:52:58 AM
According to him on the interview with Cyborg, if I understood it correctly 6 cm is the max he can 100% guarantee, with anything above that on a patient by patient basis depending on how well it's tolerated. So same thing he did with Stryde.
Title: Re: max in precice max
Post by: lovinglonglegs on December 29, 2023, 09:37:32 PM
has it been clearly addressed anywhere?
Title: Re: max in precice max
Post by: finertoga on December 30, 2023, 02:13:08 AM
According to him on the interview with Cyborg, if I understood it correctly 6 cm is the max he can 100% guarantee, with anything above that on a patient by patient basis depending on how well it's tolerated. So same thing he did with Stryde.

Do you remember what interview this was? Was it his most recent interview from a week ago?
Title: Re: max in precice max
Post by: Beemer m3 on January 05, 2024, 06:10:09 AM
https://youtu.be/i8eVt0r1xoI?t=2028
35 min mark. theres a chart.
190lbs will break with 1 million step cycle. i havent watched the whole video so im still taking a guess.
but fda has it at 50 lbs and is underrated.
Title: Re: max in precice max
Post by: Beemer m3 on January 05, 2024, 07:13:15 AM
too bad it wont be outside the us for awhile because of fda approval stuff. if it was we can do it for cheap some where outside and go home right after.
Title: Re: max in precice max
Post by: Kintaeryos on January 05, 2024, 08:20:33 AM
Do you remember what interview this was? Was it his most recent interview from a week ago?
Yeah the one Beemer m3 posted above